Skip to Main Content

Print | Bookmark | Email | Font Size: + |

October 10, 2024

Custom Fitted Orthotic HCPCS Codes Without a Corresponding Off-the-Shelf Code – Correct Coding – Revised

Joint DME MAC and PDAC Publication

Multiple recent inquires to the Pricing, Data Analysis and Coding (PDAC) Contractor and the Durable Medical Equipment Medicare Administrative Contractors (DME MAC) have demonstrated the need for education regarding the coding and billing of custom fitted orthotics that do not have a corresponding off-the-shelf equivalent. Orthoses are listed on the PDAC website in the HCPCS to Product and Service Code Crosswalk in the following categories of OR01, OR02 and OR03, and are also identified by specific code descriptions (except certain cervical and halo codes in the table below):

  • OR01 – ORTHOSES: CUSTOM FABRICATED
    • CUSTOM FABRICATED, INCLUDES FITTING AND ADJUSTMENT
  • OR02 – ORTHOSES: PREFABRICATED (CUSTOM FITTED)
    • PREFABRICATED ITEM THAT HAS BEEN TRIMMED, BENT, MOLDED, ASSEMBLED, OR OTHERWISE CUSTOMIZED TO FIT A SPECIFIC PATIENT BY AN INDIVIDUAL WITH EXPERTISE
    • PREFABRICATED, INCLUDES FITTING AND ADJUSTMENT (emphasis added)
  • OR03 – ORTHOSES: OFF-THE-SHELF
    • PREFABRICATED, OFF-THE-SHELF

There are certain HCPCS codes categorized as OR02 Custom Fitted Orthotics for which there are no corresponding OR03 Off-the-Shelf codes. If a prefabricated orthosis is categorized as Custom Fitted (OR02), but is delivered as Off-the-Shelf, one of the following miscellaneous codes must be used to bill the DME MAC:

Code Description
L1499 SPINAL ORTHOSIS, NOT OTHERWISE SPECIFIED
L2999 LOWER EXTREMITY ORTHOSES, NOT OTHERWISE SPECIFIED
L3999 UPPER LIMB ORTHOSIS, NOT OTHERWISE SPECIFIED

Example: A supplier provides a prefabricated device that is listed on the PDAC Product Classification List (PCL) as L3960 (SHOULDER ELBOW WRIST HAND ORTHOSIS, ABDUCTION POSITIONING, AIRPLANE DESIGN, PREFABRICATED, INCLUDES FITTING AND ADJUSTMENT). Two coding options are available for billing this product, based on the actions of the supplier at the time of delivery:

L3960 – Billed if fitting requires alteration beyond minimal self-adjustment (i.e., custom fitting – see below); or,

L3999 – Billed if only minimal self-adjustment adjustment, that can be accomplished by the beneficiary, caregiver or supplier, is necessary.

In this example, when the device requires minimal self-adjustment, the supplier should bill the DME MAC L3999 (UPPER LIMB ORTHOSIS, NOT OTHERWISE SPECIFIED) because there is not a corresponding prefabricated off-the shelf HCPCS code for L3960.

Custom fitting requires the expertise of a certified orthotist or an individual who has specialized training in the provision of orthoses to fit the item to the individual beneficiary at the time of delivery. These items cannot be mailed or shipped to the beneficiary without prior custom fitting of the item. There must be documentation in the orthotist's records to describe how the device was individually fit at the time of delivery to the beneficiary.

Below is a table of HCPCS codes that are classified on the HCPCS to Product and Service Code Crosswalk as OR02: Prefabricated (Custom Fitted) where there is no corresponding Prefabricated Off-the-Shelf HCPCS code.

Prefabricated Custom Fitted Orthotics Without an Off-The-Shelf Equivalent

Code Description
L0113 CRANIAL CERVICAL ORTHOSIS, TORTICOLLIS TYPE, WITH OR WITHOUT JOINT, WITH OR WITHOUT SOFT INTERFACE MATERIAL, PREFABRICATED, INCLUDES FITTING AND ADJUSTMENT
L0140 CERVICAL, SEMI-RIGID, ADJUSTABLE (PLASTIC COLLAR)
L0150 CERVICAL, SEMI-RIGID, ADJUSTABLE MOLDED CHIN CUP (PLASTIC COLLAR WITH MANDIBULAR/OCCIPITAL PIECE)
L0180 CERVICAL, MULTIPLE POST COLLAR, OCCIPITAL/MANDIBULAR SUPPORTS, ADJUSTABLE
L0190 CERVICAL, MULTIPLE POST COLLAR, OCCIPITAL/MANDIBULAR SUPPORTS, ADJUSTABLE CERVICAL BARS (SOMI, GUILFORD, TAYLOR TYPES)
L0200 CERVICAL, MULTIPLE POST COLLAR, OCCIPITAL/MANDIBULAR SUPPORTS, ADJUSTABLE CERVICAL BARS, AND THORACIC EXTENSION
L0458 TLSO, TRIPLANAR CONTROL, MODULAR SEGMENTED SPINAL SYSTEM, TWO RIGID PLASTIC SHELLS, POSTERIOR EXTENDS FROM THE SACROCOCCYGEAL JUNCTION AND TERMINATES JUST INFERIOR TO THE SCAPULAR SPINE, ANTERIOR EXTENDS FROM THE SYMPHYSIS PUBIS TO THE XIPHOID, SOFT LINER, RESTRICTS GROSS TRUNK MOTION IN THE SAGITTAL, CORONAL, AND TRANSVERSE PLANES, LATERAL STRENGTH IS PROVIDED BY OVERLAPPING PLASTIC AND STABILIZING CLOSURES, INCLUDES STRAPS AND CLOSURES, PREFABRICATED, INCLUDES FITTING AND ADJUSTMENT
L0460 TLSO, TRIPLANAR CONTROL, MODULAR SEGMENTED SPINAL SYSTEM, TWO RIGID PLASTIC SHELLS, POSTERIOR EXTENDS FROM THE SACROCOCCYGEAL JUNCTION AND TERMINATES JUST INFERIOR TO THE SCAPULAR SPINE, ANTERIOR EXTENDS FROM THE SYMPHYSIS PUBIS TO THE STERNAL NOTCH, SOFT LINER, RESTRICTS GROSS TRUNK MOTION IN THE SAGITTAL, CORONAL, AND TRANSVERSE PLANES, LATERAL STRENGTH IS PROVIDED BY OVERLAPPING PLASTIC AND STABILIZING CLOSURES, INCLUDES STRAPS AND CLOSURES, PREFABRICATED ITEM THAT HAS BEEN TRIMMED, BENT, MOLDED, ASSEMBLED, OR OTHERWISE CUSTOMIZED TO FIT A SPECIFIC PATIENT BY AN INDIVIDUAL WITH EXPERTISE
L0462 TLSO, TRIPLANAR CONTROL, MODULAR SEGMENTED SPINAL SYSTEM, THREE RIGID PLASTIC SHELLS, POSTERIOR EXTENDS FROM THE SACROCOCCYGEAL JUNCTION AND TERMINATES JUST INFERIOR TO THE SCAPULAR SPINE, ANTERIOR EXTENDS FROM THE SYMPHYSIS PUBIS TO THE STERNAL NOTCH, SOFT LINER, RESTRICTS GROSS TRUNK MOTION IN THE SAGITTAL, CORONAL, AND TRANSVERSE PLANES, LATERAL STRENGTH IS PROVIDED BY OVERLAPPING PLASTIC AND STABILIZING CLOSURES, INCLUDES STRAPS AND CLOSURES, PREFABRICATED, INCLUDES FITTING AND ADJUSTMENT
L0464 TLSO, TRIPLANAR CONTROL, MODULAR SEGMENTED SPINAL SYSTEM, FOUR RIGID PLASTIC SHELLS, POSTERIOR EXTENDS FROM SACROCOCCYGEAL JUNCTION AND TERMINATES JUST INFERIOR TO SCAPULAR SPINE, ANTERIOR EXTENDS FROM SYMPHYSIS PUBIS TO THE STERNAL NOTCH, SOFT LINER, RESTRICTS GROSS TRUNK MOTION IN SAGITTAL, CORONAL, AND TRANSVERSE PLANES, LATERAL STRENGTH IS PROVIDED BY OVERLAPPING PLASTIC AND STABILIZING CLOSURES, INCLUDES STRAPS AND CLOSURES, PREFABRICATED, INCLUDES FITTING AND ADJUSTMENT
L0470 TLSO, TRIPLANAR CONTROL, RIGID POSTERIOR FRAME AND FLEXIBLE SOFT ANTERIOR APRON WITH STRAPS, CLOSURES AND PADDING, EXTENDS FROM SACROCOCCYGEAL JUNCTION TO SCAPULA, LATERAL STRENGTH PROVIDED BY PELVIC, THORACIC, AND LATERAL FRAME PIECES, ROTATIONAL STRENGTH PROVIDED BY SUBCLAVICULAR EXTENSIONS, RESTRICTS GROSS TRUNK MOTION IN SAGITTAL, CORONAL, AND TRANSVERSE PLANES, PROVIDES INTRACAVITARY PRESSURE TO REDUCE LOAD ON THE INTERVERTEBRAL DISKS, INCLUDES FITTING AND SHAPING THE FRAME, PREFABRICATED, INCLUDES FITTING AND ADJUSTMENT
L0472 TLSO, TRIPLANAR CONTROL, HYPEREXTENSION, RIGID ANTERIOR AND LATERAL FRAME EXTENDS FROM SYMPHYSIS PUBIS TO STERNAL NOTCH WITH TWO ANTERIOR COMPONENTS (ONE PUBIC AND ONE STERNAL), POSTERIOR AND LATERAL PADS WITH STRAPS AND CLOSURES, LIMITS SPINAL FLEXION, RESTRICTS GROSS TRUNK MOTION IN SAGITTAL, CORONAL, AND TRANSVERSE PLANES, INCLUDES FITTING AND SHAPING THE FRAME, PREFABRICATED, INCLUDES FITTING AND ADJUSTMENT
L0488 TLSO, TRIPLANAR CONTROL, ONE PIECE RIGID PLASTIC SHELL WITH INTERFACE LINER, MULTIPLE STRAPS AND CLOSURES, POSTERIOR EXTENDS FROM SACROCOCCYGEAL JUNCTION AND TERMINATES JUST INFERIOR TO SCAPULAR SPINE, ANTERIOR EXTENDS FROM SYMPHYSIS PUBIS TO STERNAL NOTCH, ANTERIOR OR POSTERIOR OPENING, RESTRICTS GROSS TRUNK MOTION IN SAGITTAL, CORONAL, AND TRANSVERSE PLANES, PREFABRICATED, INCLUDES FITTING AND ADJUSTMENT
L0490 TLSO, SAGITTAL-CORONAL CONTROL, ONE PIECE RIGID PLASTIC SHELL, WITH OVERLAPPING REINFORCED ANTERIOR, WITH MULTIPLE STRAPS AND CLOSURES, POSTERIOR EXTENDS FROM SACROCOCCYGEAL JUNCTION AND TERMINATES AT OR BEFORE THE T-9 VERTEBRA, ANTERIOR EXTENDS FROM SYMPHYSIS PUBIS TO XIPHOID, ANTERIOR OPENING, RESTRICTS GROSS TRUNK MOTION IN SAGITTAL AND CORONAL PLANES, PREFABRICATED, INCLUDES FITTING AND ADJUSTMENT
L0491 TLSO, SAGITTAL-CORONAL CONTROL, MODULAR SEGMENTED SPINAL SYSTEM, TWO RIGID PLASTIC SHELLS, POSTERIOR EXTENDS FROM THE SACROCOCCYGEAL JUNCTION AND TERMINATES JUST INFERIOR TO THE SCAPULAR SPINE, ANTERIOR EXTENDS FROM THE SYMPHYSIS PUBIS TO THE XIPHOID, SOFT LINER, RESTRICTS GROSS TRUNK MOTION IN THE SAGITTAL AND CORONAL PLANES, LATERAL STRENGTH IS PROVIDED BY OVERLAPPING PLASTIC AND STABILIZING CLOSURES, INCLUDES STRAPS AND CLOSURES, PREFABRICATED, INCLUDES FITTING AND ADJUSTMENT
L0492 TLSO, SAGITTAL-CORONAL CONTROL, MODULAR SEGMENTED SPINAL SYSTEM, THREE RIGID PLASTIC SHELLS, POSTERIOR EXTENDS FROM THE SACROCOCCYGEAL JUNCTION AND TERMINATES JUST INFERIOR TO THE SCAPULAR SPINE, ANTERIOR EXTENDS FROM THE SYMPHYSIS PUBIS TO THE XIPHOID, SOFT LINER, RESTRICTS GROSS TRUNK MOTION IN THE SAGITTAL AND CORONAL PLANES, LATERAL STRENGTH IS PROVIDED BY OVERLAPPING PLASTIC AND STABILIZING CLOSURES, INCLUDES STRAPS AND CLOSURES, PREFABRICATED, INCLUDES FITTING AND ADJUSTMENT
L0635 LUMBAR-SACRAL ORTHOSIS, SAGITTAL-CORONAL CONTROL, LUMBAR FLEXION, RIGID POSTERIOR FRAME/PANEL(S), LATERAL ARTICULATING DESIGN TO FLEX THE LUMBAR SPINE, POSTERIOR EXTENDS FROM SACROCOCCYGEAL JUNCTION TO T-9 VERTEBRA, LATERAL STRENGTH PROVIDED BY RIGID LATERAL FRAME/PANEL(S), PRODUCES INTRACAVITARY PRESSURE TO REDUCE LOAD ON INTERVERTEBRAL DISCS, INCLUDES STRAPS, CLOSURES, MAY INCLUDE PADDING, ANTERIOR PANEL, PENDULOUS ABDOMEN DESIGN, PREFABRICATED, INCLUDES FITTING AND ADJUSTMENT
L0810 HALO PROCEDURE, CERVICAL HALO INCORPORATED INTO JACKET VEST
L0820 HALO PROCEDURE, CERVICAL HALO INCORPORATED INTO PLASTER BODY JACKET
L0830 HALO PROCEDURE, CERVICAL HALO INCORPORATED INTO MILWAUKEE TYPE ORTHOSIS
L1001 CERVICAL THORACIC LUMBAR SACRAL ORTHOSIS, IMMOBILIZER, INFANT SIZE, PREFABRICATED, INCLUDES FITTING AND ADJUSTMENT
L1005 TENSION BASED SCOLIOSIS ORTHOSIS AND ACCESSORY PADS, INCLUDES FITTING AND ADJUSTMENT
L1600 HIP ORTHOSIS, ABDUCTION CONTROL OF HIP JOINTS, FLEXIBLE, FREJKA TYPE WITH COVER, PREFABRICATED ITEM THAT HAS BEEN TRIMMED, BENT, MOLDED, ASSEMBLED, OR OTHERWISE CUSTOMIZED TO FIT A SPECIFIC PATIENT BY AN INDIVIDUAL WITH EXPERTISE
L1610 HIP ORTHOSIS, ABDUCTION CONTROL OF HIP JOINTS, FLEXIBLE, (FREJKA COVER ONLY), PREFABRICATED ITEM THAT HAS BEEN TRIMMED, BENT, MOLDED, ASSEMBLED, OR OTHERWISE CUSTOMIZED TO FIT A SPECIFIC PATIENT BY AN INDIVIDUAL WITH EXPERTISE
L1620 HIP ORTHOSIS, ABDUCTION CONTROL OF HIP JOINTS, FLEXIBLE, (PAVLIK HARNESS), PREFABRICATED ITEM THAT HAS BEEN TRIMMED, BENT, MOLDED, ASSEMBLED, OR OTHERWISE CUSTOMIZED TO FIT A SPECIFIC PATIENT BY AN INDIVIDUAL WITH EXPERTISE
L1650 HIP ORTHOSIS, ABDUCTION CONTROL OF HIP JOINTS, STATIC, ADJUSTABLE, (ILFLED TYPE), PREFABRICATED, INCLUDES FITTING AND ADJUSTMENT
L1660 HIP ORTHOSIS, ABDUCTION CONTROL OF HIP JOINTS, STATIC, PLASTIC, PREFABRICATED, INCLUDES FITTING AND ADJUSTMENT
L1686 HIP ORTHOSIS, ABDUCTION CONTROL OF HIP JOINT, POSTOPERATIVE HIP ABDUCTION TYPE, PREFABRICATED, INCLUDES FITTING AND ADJUSTMENT
L1690 COMBINATION, BILATERAL, LUMBO-SACRAL, HIP, FEMUR ORTHOSIS PROVIDING ADDUCTION AND INTERNAL ROTATION CONTROL, PREFABRICATED, INCLUDES FITTING AND ADJUSTMENT
L1831 KNEE ORTHOSIS, LOCKING KNEE JOINT(S), POSITIONAL ORTHOSIS, PREFABRICATED, INCLUDES FITTING AND ADJUSTMENT
L1910 ANKLE FOOT ORTHOSIS, POSTERIOR, SINGLE BAR, CLASP ATTACHMENT TO SHOE COUNTER, PREFABRICATED, INCLUDES FITTING AND ADJUSTMENT
L1930 ANKLE FOOT ORTHOSIS, PLASTIC OR OTHER MATERIAL, PREFABRICATED, INCLUDES FITTING AND ADJUSTMENT
L1932 AFO, RIGID ANTERIOR TIBIAL SECTION, TOTAL CARBON FIBER OR EQUAL MATERIAL, PREFABRICATED, INCLUDES FITTING AND ADJUSTMENT
L1951 ANKLE FOOT ORTHOSIS, SPIRAL, (INSTITUTE OF REHABILITATIVE MEDICINE TYPE), PLASTIC OR OTHER MATERIAL, PREFABRICATED, INCLUDES FITTING AND ADJUSTMENT
L1971 ANKLE FOOT ORTHOSIS, PLASTIC OR OTHER MATERIAL WITH ANKLE JOINT, PREFABRICATED, INCLUDES FITTING AND ADJUSTMENT
L2035 KNEE ANKLE FOOT ORTHOSIS, FULL PLASTIC, STATIC (PEDIATRIC SIZE), WITHOUT FREE MOTION ANKLE, PREFABRICATED, INCLUDES FITTING AND ADJUSTMENT
L2112 ANKLE FOOT ORTHOSIS, FRACTURE ORTHOSIS, TIBIAL FRACTURE ORTHOSIS, SOFT, PREFABRICATED, INCLUDES FITTING AND ADJUSTMENT
L2114 ANKLE FOOT ORTHOSIS, FRACTURE ORTHOSIS, TIBIAL FRACTURE ORTHOSIS, SEMI-RIGID, PREFABRICATED, INCLUDES FITTING AND ADJUSTMENT
L2116 ANKLE FOOT ORTHOSIS, FRACTURE ORTHOSIS, TIBIAL FRACTURE ORTHOSIS, RIGID, PREFABRICATED, INCLUDES FITTING AND ADJUSTMENT
L2132 KAFO, FRACTURE ORTHOSIS, FEMORAL FRACTURE CAST ORTHOSIS, SOFT, PREFABRICATED, INCLUDES FITTING AND ADJUSTMENT
L2134 KAFO, FRACTURE ORTHOSIS, FEMORAL FRACTURE CAST ORTHOSIS, SEMI-RIGID, PREFABRICATED, INCLUDES FITTING AND ADJUSTMENT
L2136 KAFO, FRACTURE ORTHOSIS, FEMORAL FRACTURE CAST ORTHOSIS, RIGID, PREFABRICATED, INCLUDES FITTING AND ADJUSTMENT
L3931 WRIST HAND FINGER ORTHOSIS, INCLUDES ONE OR MORE NONTORSION JOINT(S), TURNBUCKLES, ELASTIC BANDS/SPRINGS, MAY INCLUDE SOFT INTERFACE MATERIAL, STRAPS, PREFABRICATED, INCLUDES FITTING AND ADJUSTMENT
L3960 SHOULDER ELBOW WRIST HAND ORTHOSIS, ABDUCTION POSITIONING, AIRPLANE DESIGN, PREFABRICATED, INCLUDES FITTING AND ADJUSTMENT
L3962 SHOULDER ELBOW WRIST HAND ORTHOSIS, ABDUCTION POSITIONING, ERB'S PALSY DESIGN, PREFABRICATED, INCLUDES FITTING AND ADJUSTMENT
L3980 UPPER EXTREMITY FRACTURE ORTHOSIS, HUMERAL, PREFABRICATED, INCLUDES FITTING AND ADJUSTMENT
L3981 UPPER EXTREMITY FRACTURE ORTHOSIS, HUMERAL, PREFABRICATED, INCLUDES SHOULDER CAP DESIGN, WITH OR WITHOUT JOINTS, FOREARM SECTION, MAY INCLUDE SOFT INTERFACE, STRAPS, INCLUDES FITTING AND ADJUSTMENTS
L3982 UPPER EXTREMITY FRACTURE ORTHOSIS, RADIUS/ULNAR, PREFABRICATED, INCLUDES FITTING AND ADJUSTMENT
L3984 UPPER EXTREMITY FRACTURE ORTHOSIS, WRIST, PREFABRICATED, INCLUDES FITTING AND ADJUSTMENT

To identify a prefabricated custom fitted HCPCS code which has a corresponding prefabricated off -the-shelf HCPCS code, suppliers should reference the joint DME MAC publication "Definitions Used for Off-the-Shelf versus Custom Fitted Prefabricated Orthotics (Braces) – Correct Coding – Revised."

For questions about correct coding, contact the PDAC HCPCS Helpline at (877) 735-1326 during the hours of 9:30 a.m. to 5:00 p.m. ET, Monday through Friday. You may also visit the PDAC websiteExternal Website to chat with a representative or select the Contact UsExternal Website button at the top of the PDAC website for email, FAX, or postal mail information.

Publication History

October 10, 2024 Revised to remove L1652 and L1820 from the Prefabricated Custom Fitted Orthotics Without an Off-The-Shelf Equivalent table
March 11, 2021 Originally Published

spacer

26 Century Blvd Ste ST610, Nashville, TN 37214-3685 © CGS Administrators, LLC. All Rights Reserved