October 22, 2020
Ankle-Foot Orthoses – Arizona-Type – Correct Coding – REVISED
Joint DME MAC Article
Arizona AFO is a company that manufactures a line of custom fabricated ankle-foot orthoses. Other companies manufacture similar products. The Pricing, Data Analysis, and Coding (PDAC) contractor has listed the Arizona AFO line of products on the Product Classification List (PCL).
For the Arizona Short and Arizona Tall, or similar custom fabricated braces, only the following codes should be used:
L1940 |
Ankle foot orthosis, plastic or other material, custom fabricated |
L2330 |
Addition to lower extremity, lacer molded to patient model, for custom fabricated orthosis only |
L2820 |
Addition to lower extremity orthosis, soft interface for molded plastic below knee section |
L2330 is used whether the closure is a lacer closure or a hook and loop closure. L2820 is used only if a soft interface, either leather or other material, is provided.
For the Arizona Extended and the Arizona Unweighting or similar custom fabricated braces, only the following codes should be used:
L1960 |
Ankle foot orthosis, posterior solid ankle, plastic, custom-fabricated |
L2330 |
Addition to lower extremity, lacer molded to patient model, for custom fabricated orthosis only |
L2820 |
Addition to lower extremity orthosis, soft interface for molded plastic below knee section |
The following codes must not be used for these orthoses:
L2275 |
Addition to lower extremity, varus/valgus correction, plastic modification, padded/lined |
L2280 |
Addition to lower extremity, molded inner boot |
For the Arizona Partial Foot model or similar orthosis, use codes:
L1940 |
Ankle foot orthosis, plastic or other material, custom-fabricated |
L2330 |
Addition to lower extremity, lacer molded to patient model, for custom fabricated orthosis only |
L2820 |
Addition to lower extremity orthosis, soft interface for molded plastic below knee section |
L5000 |
Partial foot, shoe insert with longitudinal arch, toe filler |
Suppliers, manufacturers and distributors are reminded to check the product listing on the Product Classification List located on Durable Medical Equipment Coding System (DMECS); if there are any changes they are to notify the PDAC.
Suppliers who have incorrectly coded these orthoses should submit a voluntary refund to the DME MAC.
For questions about correct coding, contact the PDAC Contact Center at (877) 735-1326 during the hours of 8:30 a.m. to 5:00 p.m. ET, Monday through Friday, or e-mail the PDAC by completing the DME PDAC Contact Form located on the PDAC website.
Publication History
December 2008 |
Originally Published |
November 2011 |
Revised – Section related to Arizona Extended and the Arizona Unweighting or similar custom fabricated braces |
October 2020 |
Reviewed and Revised to make current |